AUTO! - Chassis, Interior and Car Body

In addition to the development of alternative drive and propulsion solutions as well as autonomous driving concepts, another primary focus of Saxony’s automobile industry is found in the research field “lightweight construction in efficient material combinations.” Here as well, “Autoland Saxony” is able to demonstrate unique competences.

Chassisteile, Bharat Forge Brand-Erbisdorf

Source: Bharat Forge

BHARAT FORGE ALUMINIUMTECHNIK GMBH & CO. KG, BRAND-ERBISDORF

The Bharat Forge Aluminiumtechnik GmbH & Co. KG in Brand-Erbisdorf, a member of the Indian Kalyani Group, is a specialist for the development and production of weight-optimized functional parts on behalf of the automobile industry. Towards this end, the company acts in a consistently sustainable manner, for example, when it comes to the recycling of aluminum scrap in its own factory. One of the latest in-house developments is the „adforge“ production process which not only saves energy, but also permits the manufacture of complex parts and components which are not forgeable with conventional methods. A new, innovative precursor material – „HCM“ (horizontal casting material) – provides above average strength potential and high corrosion resistance, and it scores points with its lower energy consumption in production.

Sector Structure Automotive Industry in Saxony

Arbeitsschritt nach dem Beschichten eines BMW i8-Vorderachsenmoduls, BENSELER Beschichtungen Sachsen GmbH & Co. KG, Frankenberg

Source: BENSELER

BENSELER BESCHICHTUNGEN SACHSEN GMBH & CO. KG / BENSELER SACHSEN GMBH & CO. KG, FRANKENBERG

Located in Frankenberg, the BENSELER Group from Baden-Württemberg supports the lightweight automotive construction industry with its innovative coating procedures. The surface specialists protect both the front axle module of the BMW i8 and the undercarriage of the BMW i3 against corrosion. By applying a special cathodic dip coating (CDC) procedure and thanks to the competences that have been developed in the bonding sector, the ready-to-assemble aluminum components can be attached directly to the carbon passenger compartment in the BMW Plant Leipzig. In addition to cathodic dip coating, the BENSELER Beschichtungen Sachsen GmbH & Co. KG also provides electrostatic powder coating and wet coating. The BENSELER Sachsen GmbH & Co. KG specializes in diverse deburring processes.

Action Composites Hightech GmbH, technology and testing center Kesselsdorf

Since 2013, the thyssenkrupp AG has been pooling its activities revolving around high performance lightweight components made of carbon fiber-reinforced plastics (CFRP) in a Tech Center Carbon Composites in Kesselsdorf near Dresden. On August 19, 2019, thyssenkrupp AG announced the sale of thyssenkrupp Carbon Components GmbH to the Austrian Action Composites Hightech GmbH. The main business area of the  Action Composites Hightech GmbH's technology and testing center in Kesselsdorf is the development and production of such vehicle components as, for example, lightweight CFRP wheels which entail weight savings between 30 and 50 percent when compared to conventional aluminum rims. 

   

In der Fertigung bei Weidplas in Treuen: Hitzeschilder, die in BMW-Fahrzeugen Motor- und Passagierraum trennen

Source: WEIDPLAS GmbH

WEIDPLAS GERMANY GMBH, TREUEN PRODUCTION SITE

The WEIDPLAS Germany GmbH manufactures technically sophisticated plastic components for well-known European automobile manufacturers at its production site Treuen. The product spectrum of the company, which is part of the US American Techniplas Group, includes air/water separation systems as well as functional and trim part components for engine compartments and vehicle interiors.

TOWER AUTOMOTIVE PRESSWERK ZWICKAU GMBH

The Tower Automotive Presswerk Zwickau GmbH is one of the pioneers when it comes to the use of high-strength and ultra-highstrength steels for car body components. The company produces, above all, complex structural and car body shell components on behalf of the international automobile industry. With its latest investments into hot forming technology, the company, which belongs to the US American automotive supplier Tower International, continues to expand its innovation competence. 

Arbeit im Beschusskanal mit integriertem Materialprüflabor bei IndiKar in Wilkau-Haßlau

Source: IndiKar Individual Karosseriebau GmbH

INDIKAR INDIVIDUAL KAROSSERIEBAU GMBH, WILKAU-HASSLAU

As a systems supplier for renowned automobile manufacturers and automotive suppliers, the IndiKar Individual Karosseriebau GmbH from Wilkau-Haßlau is active in the competence fields engineering, materials development, vehicle armoring as well as prototype construction and small batch production. A specific focus is on armoring vehicles for civil and military purposes while using lightweight materials for higher protection at a lower weight.

MELEGHY AUTOMOTIVE BERNSBACH GMBH

In addition to its focus on sheet metal forming, the Meleghy Automotive Bernsbach GmbH is also the center of expertise for plastics processing within the North Rhine-Westphalian Meleghy Automotive Group. In a special in-house production area for the manufacture of composites, the company not only produces crash-relevant structural components made of glass-mat-reinforced polypropylene or polyamide, but also such flat panel components as, for example, undercarriage protection made of a special thermoplastic material. The products are used in hybrid and electric vehicles.

Your Contact Person

Günther, Dr. André
Dr. André Günther
Industry, Innovation & Marketing
Phone: +49 (351) 2138-242 Fax: +49 (351) 2138-109
Please write message Save vCard

Downloads

Social Media

Top